Cast Iron Gate Valves or Carbon Steel Gate Valves | Chinaxuval.com

 Cast iron gate valves or carbon steel gate valves?

This article【XUVAL】for you to introduce.



Cast iron gate valves
Cast iron gate valves are divided into gray iron gate valves and ductile iron gate valves.The valve body of gray iron gate valve is made of gray iron and its seal is copper seal.The valve body of ductile iron gate valve is made of ductile iron and sealed with rubber seal.Cast iron gate valves have two types of structure: rising stem and dark stem.
Cast iron gate valves are mainly used in water system pipelines, suitable for ambient temperature and low pressure, including municipal water supply, building water supply and drainage, farmland irrigation and so on.


Carbon steel gate valve

Carbon steel gate valve is basically a rising stem structure, the sealing surface material is stainless steel, can be used in high temperature, high pressure environment, such as petroleum, chemical, metallurgy, energy systems and other pipelines, the use of carbon steel gate valve.

评论

发表评论

此博客中的热门博文

The bonds between PSA(Pressure Swing Adsorption) and High Performance Butterfly Valve

图片
  High performance butterfly valves ： Generally refers to  double eccentric butterfly valve  and  triple eccentric butterfly valve ,due to their excellent working performance and high sealing ability (compared with concentric butterfly valve) are widely used in petrochemical,power plants,metallurgy,civil heating fields.Eccentric butterfly valves have the good working performacne to meeting sever and strict requirements in many different industries.Today, we are going to introduce the application of eccentric butterfly valve in air separation for making oxygen,hydrogen,CO etc. At present,the mature air separation system is PSA(Pressure Swing Adsorption),it need certain number of programmed valves (valve parts usually double or triple eccentric butterfly valve) in its pipeline system to control and adjust the medium. FEIDA  double (and tripple) eccentric butterfly valve are widely used in this kind of PSA system due to the valves' excellent features: 1-Long service life,on-off 1 mill
阅读全文

Hardening method of metal hard sealed ball valve balls and valve seats

  At present, the commonly used hardening processes for the surface of  metal hard sealed ball valves  mainly include the following: (1) Surface welding (or spray welding) of hard alloy on the sphere can achieve a hardness of over 40HRC. The process of surface welding of hard alloy on the sphere is complex, with low production efficiency, and large area welding can easily cause deformation of the parts. Currently, there is relatively little use of surface hardening technology on the sphere. (2) The surface of the sphere is plated with hard chromium, with a hardness of 60-65HRC and a thickness of 0.07-0.10ram. The chromium plating layer has high hardness, wear resistance, corrosion resistance, and can maintain surface brightness for a long time. The process is relatively simple and the cost is relatively low. However, the hardness of the hard chromium coating will rapidly decrease as the temperature increases due to the release of internal stress, and its working temperature cannot exce
阅读全文

Introduction to the Function, Principle, and Characteristics of Globe Valves

  Globe valves   are used to cut off the flow of media, and are suitable for situations that require frequent opening. The sealing parts of a globe valve are the valve disc and valve seat. In order to ensure a tight closing of the globe valve, the mating surface of the valve disc and valve seat should be ground or a gasket should be used. The sealing surface can also be embedded with corrosion-resistant and wear-resistant materials such as bronze and stainless steel.The valve disc and valve stem of the globe valve are connected in a movable manner to ensure a tight fit between the valve disc and valve stem. The lifting and lowering of the valve disc of a globe valve is generally controlled by the valve stem. The upper part of the valve stem is a handwheel, and the middle part is a threaded and packing sealing section. The function of the packing is to prevent the internal medium of the valve body from leaking along the valve stem. The function of a shut-off valve 1、 The main function o
阅读全文